burghardt/easy-wg-quick

Creates Wireguard configuration for hub and peers with ease

easy-wg-quick

easy-wg-quick - Creates Wireguard configuration for hub and peers with ease

Getting Started

These instructions will get you a copy of the project up and running on your local machine. This machine (called hub) will act as VPN concentrator. All other peers connects to hub (as in a "road warrior" configuration).

Prerequisites

Install Wireguard for your operating system on local machine, router, VPS or container. This will be your hub.

As dependences /bin/sh, wg, wg-quick, awk, grep and ip commands should be available on hub. If ip is not available user is required to set EXT_NET_IF and EXT_NET_IP variables in script to external network interface name and IP address (or edit wghub.conf). Optionally qrencode can be used to generate QR codes for mobile applications.

Debian, Ubuntu

sudo apt install wireguard-tools mawk grep iproute2 qrencode

Fedora, RHEL, CentOS

sudo dnf install wireguard-tools gawk grep iproute qrencode

FreeBSD

sudo pkg install net/wireguard graphics/libqrencode

Installing Wireguard tools (and modules)

This script requires only tools installed, but to use Wireguard module (or user-space implementation) is also required. Detailed install guide for various operating systems is available at wireguard.com/install.

Peers also requires Wireguard installed. Android and iOS are supported.

Installing

Just download the script and make it executable with chmod.

wget https://raw.githubusercontent.com/burghardt/easy-wg-quick/master/easy-wg-quick
chmod +x easy-wg-quick

Or clone repository.

git clone https://github.com/burghardt/easy-wg-quick.git

Usage

Script do not require any arguments. Just run it and it will create usable Wireguard configuration for hub and one peer. Any sequential invocation creates another peer configuration within same hub.

./easy-wg-quick # 1st run creates hub configuration and one client
./easy-wg-quick # any other runs creates additional clients

Passing an argument to script creates configuration file with name instead of sequence number to help remembering which config was for which device. Following command will create wgclient_client_name.conf file.

./easy-wg-quick client_name

Sample output

No seqno.txt... creating one!
No wgpsk.key... creating one!
No wghub.key... creating one!
No wghub.conf... creating one!
Wireguard hub address is 10.13.1.140:51820 on wlp9s0.
Note: customize [Interface] section of wghub.conf if required!

Note: passing argument to script creates client configuration with supplied
      name to help remembering which config was for which device. If you
      didn't pass any argument you can still rename created file manually
      with command:
  mv -vi wgclient_10.conf wgclient_name.conf

No wgclient_10.conf... creating one!
█████████████████████████████████████████████████████████████████████████
█████████████████████████████████████████████████████████████████████████
████ ▄▄▄▄▄ █▀██ ▀▄▀▄█▄ ▀▄ █▀▀▄█▄▄▀ ▄▀██▀▀▀▀█▄  █▀▀▄█  ▄▀▀ █▄▀█ ▄▄▄▄▄ ████
████ █   █ █▀▄▀ ▀█▀▄▄▄ ▄ ▀█ ▄██▄█ ▀▀▄ ███▀▀▄▄  ▀ ▄▄▀███▄▀▀ ▀▄█ █   █ ████
████ █▄▄▄█ █▀▀▀██▀▄██  ▀▄███▀▀▀▀▄▄ ▄▄▄ ▄  ▀██  ▄█▀▀  █▀██▄▀█▄█ █▄▄▄█ ████
████▄▄▄▄▄▄▄█▄█▄▀ ▀▄▀▄▀ ▀▄▀▄█ █▄█ █ █▄█ █ █ ▀ ▀▄█ ▀▄▀ ▀▄▀ ▀▄█▄█▄▄▄▄▄▄▄████
████▄▄   █▄ ▄ ██ ▄▄▄█ ▀█▀▄ ▀▄█▄▄█▄▄   ▄   █ █▀▄▀▄▀█▄▀▄▀▀▄▄ █▄ ▀▄▀ ▀ █████
█████▀ ▄▀▀▄▀▀▄█▀  █▀ ▀▀▄▀█▄█▄ ▄▀▀▄▄▄█ ▄▀▀█ ▄ ▀▀▄ ▄▄▄ ▀ █▀▀▀██▀▄█ ▄███████
████ ▄███ ▄▀█▄▀█▄▀ ███▀▀▀▀▀▀▄ ▄   ▀ ██▀  ▄███ ▄ ▀ ▀ ▄▄▀▄█▀▄▀▀ █▀ ▄▄▀ ████
█████▀  ▀▀▄ ▄▀▄▀▄██▄█  ▀ ▀▄▀█ █ █▀▀▄ ▀█▀▄▀█▀▀▄▄█▀ ██▀█▄▄▀█▄ ▀  ▀██▀▄▀████
████▀▄▄▀▀ ▄▄▄▄▄█ ▀█  ▀▀ ▀█ █▀█ ▀▀▄ ▀█▀██▀█ ▄▀▀▀▀▄▀   █▀▄▄▄ █ ▀▀▀ ▄▄ █████
████▀▄▄██ ▄▀▀▀▀█▄▄▄ ▀▄█ ▀▀ ▄▄▄ █▀▄   █▄▄ ▄███▀▄▀██   ▀▀██ ▄ ▀▄  ▄██▀▄████
████▄  ███▄  ▀▄█   ▄▀▄▀▀▀▀▄▀▀▄▄▀   ▄ ▄▄▄▀▄▄█▄▄ ▀█▄▄▀▀▀▄▄▄▀ ▀▄██▀ ▄▄  ████
████ █▄▀▀ ▄██▀▄ █▄▀▄ ▀ █▀ ▄ ▄██▀█ ▄ ██▀▄▄▀   █ ▄▄█  ▀▀  ▄▀█ ▄ ██ ▀▀▄▄████
████   ▄ ▀▄▄▄█▄█▀█▄ ▀▀▀ ▀▀▄▄█  ▀▄▀██ ▀▄█  █ █▄  █▀▀▀  ▀██  ▀▀ ▀▄▀ ██▀████
█████▄ ▀▄▀▄█▄ ▄▄▀█ ▄█   █▄▄▀ ▄▄▀█  ▄█▄▄▄ ▀▀▀▀ ▄▄  █ ▀▄█▄ ▄▄▀▀ █ ▀▄▀▄▄████
████ █▀█▀▄▄▀▀▄ ███ ▀█▀▀▄█▄ ▄  ▄███▀▄▄▀▀  ▀▀▀▀ ▄ █▄▀▄▄▄▀▄▀  ██ █▀ █  ▀████
█████▄▄█ ▄▄▄  █ ▄  ▀█▀ ▄█▀█▄  █▀▄▄ ▄▄▄ ▄  █▄█▄ ██▀▄█▀██▀   ▄ ▄▄▄ ▀▀▄█████
████▀█▀▄ █▄█ █▄█▄▀▀█ █▄▄  ▀███▀███ █▄█  ▄▄▄▀▀█ ▄██▀▀ ▀▀▄▄▄▄▄ █▄█ ██▄▀████
████   ▀ ▄▄  ▀█ ▄█  █▀ ▄█▄█▄▄▀████ ▄  ▄ ▄▄▄███▄▀██▄▄▄▄▄▀▄▄██ ▄ ▄▄▄█ ▄████
████ ▀ ▄▄ ▄ ▄▄ ▄▀▄█▄▀▀  █▄█▀ ▀█▀▀█ █▀██▀▀███▄▀▀▀█▄█▀  ▄█▄  ▄█▄█▀▄   ▀████
████▄▀▄▄▀▄▄█▀▄▄ █▄▄█▀  ▄▀▀█▄ ▄█▀██  ███ █▄▄█▀█▄▀▀▄ ▀▄▀▄ ▀██ ▀▀    ▀▀▄████
████  ▄▀▄▀▄▀ ▄▀▄ ▄  ▀█▄█  ▀▀▄█▄▀█▀▀▄██▀  ▄▀▀▄ ▄█▄██▀ ▄█▄▄▄ ▀ ██▄▀██▀▄████
████▀█ ▄█▄▄▄▄██▄ ▄▄▄█  ▄▀▄▄█▄█▄▀▀▀ █▀ █▀▀▄▀█▀█▀█▀▄█▄ ▀█▄█▀ ▀▄█▄█ ▄▀ ▄████
████▄▀▀█▄▄▄▀▀█▄ ▀█ ▄▀▄ ▀▀█▄▀▄▄▄ ▄▀ ▀▀▀▄▀█ █▀█  ▄▀ ▀█▄ ▀▀█▀▄▄█ █▄█▄██▀████
████▀█▀▄ ▀▄▄  █▄ ▀█▄   ▀ ▄▄▀█▀█▀▄██▀▄  ▄█▀█▀██▀ ▀▄█  ▀██▀▄█▄█▀ █ █▀ █████
█████ █ ▄▄▄ █▀  ▀██ ▀▄ ▄  █████▀█ ▄▀ ▄▄▄█ ▄▄█▄▄ ▄ ▄▄▄█▀▄▄▄▄▄▄▀ ▄█▄▄ █████
████▄█▄ ▄▀▄  ▄▀█▀██▄▀▄█▄█▀   ▄ █▀██ ▀▄ ▄▄▀▀▀▀█▀█ █▄  ▀▀ █  █▀ ▀ ▄██▀▄████
████▄▄ █ █▄▄▄▄ █ ▄▄▀█▄▀█ ▀▄▀ ▄▄ ▀ ▄█ █▄▀▀▄█▀▄  ▀███▀▀ ▄██  █▄▄█▀█▄▄▄▀████
████▀█▄ █▄▄█ █▀ ▄ ▀██ ▀ ▀▄▄▄▄██▄█▄▄▄█▄▄▄▀▀▄▀▄█▀ ▄█  ▄▀▄  ▀█  ▄█ ▄▄▀▄▄████
█████▄▄█▄█▄█▀▄█ ▀ █▄ ▀▀▀▀▀█▄█▄▄ ▄█ ▄▄▄  ▀▄▀██▄▄▀█▄▀▀  █▄█ ▄█ ▄▄▄ █ █▀████
████ ▄▄▄▄▄ █▄██▀▀█▀██▀▀▄█ ▄▀ ▄█▄█▀ █▄█    █▀▀▄█▄  █▄█▄▀█▀  █ █▄█ ▀▀▀▄████
████ █   █ █ █ ▀▄█ ▀███▄██▄▄  ▄ █ ▄▄ ▄▄█ ▄▀▀█▀▄▄▀▀█▄▄▄▀▀▀█ █   ▄▄▄▀ █████
████ █▄▄▄█ █  ▀▄ █▄▀█▀ ▄███▄  █ ▄ ▀█▄ ▄▀ ▀▄▀▀▄ █▀ ▄ ▀▄█▀▄█▀▄▄███▄▀▀ █████
████▄▄▄▄▄▄▄█▄▄██▄▄█▄█▄█▄▄▄▄█▄▄▄██▄█████▄▄█▄▄▄█▄▄████████▄▄▄█▄████████████
█████████████████████████████████████████████████████████████████████████
█████████████████████████████████████████████████████████████████████████
Scan QR code with your phone or use "wgclient_10.conf" file.
Updating wghub.conf... done!

Important: Deploy updated wghub.conf configuration to wireguard with wg-quick:
  sudo wg-quick down ./wghub.conf # if already configured
  sudo wg-quick up ./wghub.conf
  sudo wg show # to check status

Using generated configuration

On hub configure Wireguard.

sudo wg-quick up ./wghub.conf

On peer scan QR code or copy wgclient_10.conf.

Finally on hub check if everything works with sudo wg show.

interface: wghub
  public key: kbaG3HxSDz3xhqiTNXlo1fZkFa+V6oTl+w0cSAQKxwQ=
  private key: (hidden)
  listening port: 51820

peer: th8qYu0R0mgio2wPu1kz6/5OOgi6l8iy7OobK590LHw=
  preshared key: (hidden)
  endpoint: 10.60.1.150:37218
  allowed ips: 10.127.0.10/32
  latest handshake: 50 minutes, 22 seconds ago
  transfer: 32.64 MiB received, 95.24 MiB sent

Fine tunning

Disabling external interface autodetection

By default easy-wg-quick use interface with default routing done over it as external network interface of VPN hub. If autodetection fails or generation of configuration is done outside the hub (i.e. on air gapped laptop) user can set interface name in extnetif.txt file with command:

echo vtnet0 > extnetif.txt

Disabling external IP address autodetection

By default easy-wg-quick uses IP address of interface that has default routing done over it as external IP address of VPN hub. This might not be true if hub is behind firewall or NAT/PAT/masquarading is done. User can set prefered IP address in extnetip.txt file with command:

echo 192.168.1.2 > extnetip.txt

In case of NAT/PAT/masquarading one can try to use service like ifconfig.me for autodetection:

curl ifconfig.me/ip > extnetip.txt

Disabling random port assignment

By default easy-wg-quick use random port number from range 1025-65535. When using static port number is required for firewall configuration or other reasons user can set preferred port number (80 in this example) in portno.txt file with command:

echo 80 > portno.txt

Setting custom DNS

By default easy-wg-quick uses 1.1.1.1 as it's internal DNS. You can use the command below to serve a custom DNS to clients.

echo 8.8.8.8 > intnetdns.txt

Choosing firewall type

Firewall type is guessed from operating system. For Linux iptables and ip6tables are used. For FreeBSD basic pf NAT rules are implemented. File fwtype.txt contains name of firewall type. To override autodetection or disable any rules run one of the following commands:

echo iptables > fwtype.txt # to choose Linux netfilter
echo pf > fwtype.txt       # to choose OpenBSD PF
echo custom > fwtype.txt   # to include predefined commands from file
echo none  > fwtype.txt    # to skip any setup during wg-quick up/down

If fwtype.txt contains word custom content of commands.txt is included in the wghub.conf file.

Format of commands.txt is:

PostUp = echo "command 1"
PostUp = echo "command 2"
PostUp = ...

PostDown = echo "command 1"
PostDown = secho "command 2"
PostDown = ...

Enabling IPv6

If global unicast IPv6 address is detected on server tunnels will be created with inner IPv6 addresses allocated. This allows hub's clients to connect over hub's IPv6 NAT to IPv6 network.

To use outer IPv6 addresses (i.e. connect client to hub over IPv6) just set EXT_NET_IF and EXT_NET_IP variables in script to external network interface name and IPv6 address (or edit wghub.conf).

Redirecting DNS

DNS redirection might be required to integrate with services like Pi-hole or Cloudflare DNS over TLS. This could be achieved by using port 53 UDP/TCP redirection in wghub.conf.

PostUp = iptables -t nat -A PREROUTING -i %i -p udp -m udp --dport 53 -j DNAT --to-destination 1.1.1.1:53
PostUp = iptables -t nat -A PREROUTING -i %i -p tcp -m tcp --dport 53 -j DNAT --to-destination 1.1.1.1:53
PostDown = iptables -t nat -D PREROUTING -i %i -p udp -m udp --dport 53 -j DNAT --to-destination 1.1.1.1:53
PostDown = iptables -t nat -D PREROUTING -i %i -p tcp -m tcp --dport 53 -j DNAT --to-destination 1.1.1.1:53

When using IPv6 similar rules should be set independently with ip6tables.

Persisting configuration with systemd

Systemd may load configuration for both hub and clients using wg-quick.service. Note that also native support for setting up Wireguard interfaces exists (since version 237).

sudo cp wghub.conf /etc/wireguard/wghub.conf
sudo systemctl enable [email protected]
sudo systemctl start [email protected]
systemctl status [email protected]

License

This project is licensed under the GPLv2 License - see the LICENSE file for details.

Acknowledgments

OpenVPN's easy-rsa was an inspiration for writing this script.

Repo Not Found